Description
Enerdrive ePOWER 12V 40A DC to DC Battery Charger designed to meet the rugged demands of Australian conditions and delivering multiple source charging for DC systems The Enerdrive ePOWER DC2DC Battery Charger is a fully automatic multistage, multi input battery charger with the ability to charge from either an alternator linked to a battery; or via solar power with the in built Maximum Power Point Tracking (MPPT) Solar Controller With two inputs available, the main/house battery will be charged from either the engine while underway, or via the solar panels when stationary The process to choose either engine or solar is fully automatic and both functions are controlled from within the unit itself without the need for external relays During normal operation the ePOWER DC2DC+ Battery Charger will do a full charge cycle to float stage on the house battery bank with ability to choose either GEL, AGM, Flooded, Custom Programmable or Lithium Once float stage is reached the charger transitions to a power supply mode to support any on-board DC loads 12V 40A DC2DC Battery Charger Features Two totally independent DC Inputs for both engine and solar regulation charging one house battery bank output DC M6 screw terminals that will allow for large battery cable connection between all sources A dedicated Maximum Power Point (MPPT) solar regulator The same battery algorithms as included in Enerdrives AC mains ePOWER battery charger including a specific lithium charging profile 40A output up to 40+C with thermo controlled fan cooling Fully programmable LCD display to show which source is charging the battery along with charger status, voltage and amperage Temperature sensor included in charger for more accurate battery charging PRO TIPS: Common accessories to go with this DC to DC charger are the 60Amp & 70Amp breakers, also the 3 pre-wired & fused charging cables These are available in the Accessory List above to add as optional extras, please see the product manual & drawings for the connection You will require a ratchet crimping tool for this cable kit Multistage Charging Process The ePOWER DC2DC+ Battery Charger is a fully automatic, set and forget charger It is designed to quickly and accurately recharge your deep cycle batteries utilising charger algorithms that help to maximise the life of your specialised deep cycle batteries The ePOWER DC2DC+ Battery Charger features multistage smart charging technology that enables the charger to be connected to your battery bank permanently With the input of multiple sources, you can be assured of charging your batteries whenever underway; or when the sun is shining on your solar array As dictated by battery manufacturers recommendations, deep cycle batteries require a multistage charge sequence for perfect, fast and accurate charging The Enerdrive ePOWER DC2DC+ smart charger delivers three primary charge stages Stage 1 Bulk or Boost charge; The battery is charged at full rated output current of the charger until the battery
