Festool C 18 KIT – 18V Drill/Driver Kit (2 x 5.2Ah)

Description

Features 18 volts of power guarantees the C 18 Cordless Drill works faster, easier and better The revolutionary EC-TEC brushless motor is extremely energy efficient, which translates into longer run times Wear-free design requires no maintenance and is extremely robust The FastFix interface system means the C 18 can do the job of five different drills in one tool Stay versatile and flexible by changing in seconds between driving screws, drilling and countersinking, work inside cabinets or around corners with the angle attachment, or right up against the edge with the eccentric offset attachment Lightweight, compact and easily fits into tight areas Inbuilt LED light ensures precise work even in dark corners.
The Centrotec chuck is compatible only with Festool Accessories.
This combination reduces the length and weight of the drill and allows fast change over.
Intelligent motor management – The brushless EC-TEC motor is wear-free and converts the energy from the battery into optimum power with virtually no losses.
The electronic motor management also guarantees maximum service life: Microprocessors monitor and control the temperature, voltage and current consumption of the motor, electronics and battery.
Durable and extremely light – The Li-HighPower Compact battery guarantees full power, while weighing considerably less.
To provide even more endurance, the brushless and maintenance-free EC-TEC motor only takes as much power as required by each screwing task.
Precise work – With the handle positioned on the drilling and screwing axis, the handy and perfectly balanced C-design enables it to be positioned extremely accurately.
Ideal for tight spaces – As with all cordless drills from Festool, the bits can also be inserted in the direct bit holder of the spindle on the C 18.
Six bits always to hand – The practical bit holder provides space for up to six bits – magnetically secured against falling out.
In the smallest of spaces – The angle attachment is perfect for work around corners and reaching concealed screws at tight angles.
Living on the edge – Every screw can be reached with the eccentric adapter.
CENTROTEC quick-change system – Fast change between drilling, countersinking and screwdriving: The CENTROTEC quick-change system is a chuck and bit holder in one and, at the same time, 50% smaller and 80% lighter than a standard drill chuck.
The hexagonal tools are centred using balls – for optimised power transmission and ten times higher true running.
Chuck for standard tools – The chuck with a standard width of up to 13 mm also enables the use of all standard bits and drill bits.
Tool-free mounting via the FastFix interface.
As versatile as your work – The C18 can easily adapt to whatever work you’re doing.
The flexibility of quick and easy chuck attachment changes means the C18 will always get the job done faster.
Optimum power performance – Fully electronic torque adjustment and shut-off for optimum power development in all situations.
The torque setting for screwdriving is retained, even when drilling takes place at maximum torque.
Optimal lighting – The integrated LED light permits precise work even in dark corners.
AIRSTREAM Battery – AIRSTREAM technology cools batteries for faster use and significantly increased charging capacity.
EC-TEC Brushless Motor – The EC-TEC drive concept generates an extraordinary amount of power while consuming extremely low amounts of energy.
Electronic – Speed control for adjusting to the working material.
FastFix – Makes changing accessories or consumables for routing, sawing, planing, sanding, drilling and screwdriving tools easier.
Lithium-ion battery – Fitted with high-performance lithium ion battery pack.
Plus Systainer – Plus versions of power tools come in systainer storage containers.
Torque Shut Off – Intelligent technologoy ensures the optimum screwdriving force for every material.
Main Applications Furniture assembly and kitchen fitting Carpentry/Joinery and interior fitting Trade fair/Metal construction and shopfitting Painting and interior decorating Bodyshops and paintshops Industrial use, fastening in series production Fences, pergolas, carports, canopies and studwork Specifications Tool Weight (kg): 1.8 kg Tool Holder ie.
Centrotec: Centrotec Drilling Diameter Steel (mm): 13 mm No Load Speed 1st Gear (rpm): 0 rpm – 450 rpm No Load Speed 2nd Gear (rpm): 0 rpm – 1,500 rpm Drilling Diameter Wood (mm): 40 mm Battery Voltage (V): 18V Battery Capacity (Ah): 5.2 Ah Power Source: Cordless Motor Type: Brushless Battery Type: Lithium-ion Gears: 2 Torque Adjustment 1st Gear (Nm): 0.8 Nm – 8 Nm Torque Adjustment 2nd Gear (Nm): 0.5 Nm – 6 Nm Maximum Torque Wood (Nm): 27 Nm Maximum Torque Steel (Nm): 45 Nm Chuck Range (mm): 1.5 mm – 13 mm Includes C 18 Cordless Drill CENTROTEC Chuck CENTROTEC Bit Holder FastFix keyless Chuck 13 mm Bit PZ 2 Belt Clip 2 x 18V Li-ion 5.2 Ah Airstream Battery Packs Charger TCL 6 Systainer3 SYS 2 Medium 187×396 Storage Box Tool Manual